How to set up a Guest Network for Halo - ยินดีต้อนรับสู่เว็บไซด์ MERCUSYS

A Guest Network allows visitors in your home to use the internet without needing to connect to your private network. Wireless devices connected to a Guest network have no access to resources shared on the Main network, so the security and privacy of the Main network are guaranteed.

Note:

1. When Halo works in the Router mode, the Guest network and Main network are isolated.

2. When Halo works in the AP mode, on the Mercusys app > More > Wi-Fi settings > Guest network, there is an "Isolated From Main Network" switch once the Guest network is enabled, and it can be used to control whether to isolate the Guest network and the Main network.

3. Features available in Halo may vary by model and software version. All steps and images described here are only examples and may not reflect your actual Halo experience.

Here, we take Halo H50G as an example.

1. Open the MERCUSYS App, go to More > Wi-Fi, then turn on the Guest Network button.

The Wi-Fi button on the top.

2. On the Guest Network settings page, tap Security to change the wireless security type. And you can change the Guest Network Name and Password. If you want to hide your guest network, turn on Hide Network switch. Then click on Save.

Note: If you leave the security type and password fields blank, the Guest Network will not require a password to connect.

The guest network settings and security settings.

Tap Effective Time option to set the duration time of the Guest Network.

Note: In Auto mode, the Guest Network turns off automatically if no devices are connected to it for about 10 minutes.

Some Halo models do not support this feature and will support it via firmware updates in the future.

The Wi-Fi settings and the effective time option of the guest network. The effective time setting of the guest network.

Tap bandwidth Control option if you want to limit the bandwidth allocated to the Guest Network. After you set the bandwidth, please click on Save to save the settings.

Note: Some Halo models do not support this feature and will support it via firmware updates in the future.

The Wi-Fi settings and the bandwidth control option of the guest network. The bandwidth control settings of the guest network.

When Halo works in the AP mode, there is an Isolated From Main Network switch, and when it's enabled, your guests will be authorized to access your local network resources.

Note: Some Halo models do not support this feature and will support it via firmware updates in the future.

The Wi-Fi settings and the isolated from main network switch in the middle.